داده های ثبت شده در پورتال
1
Hamed Adibi, Omid Hatami Farzaneh, S.Mehdi Rezaei,
"Effects of minimum quantity lubrication (MQL) on grinding processes using eco-friendly nanofluids: a review", Advances in Materials and Processing Technologies,
Vol. 0,
Num. 0,
Page 1-43,
April 2023,
2
Mohsen Asghari, Mohammad Zareinejad, S.Mehdi Rezaei, Hamidreza Amindavar,
"DOA estimation of coherently and incoherently distributed sources using a characteristic function based ESPRIT algorithm with heavy-tailed signals and noises", Physical Communication,
Vol. 59,
Num. 1,
Page 1-15,
April 2023,
3
Sepideh Akbari, Mohammad Hadi Namdar Ghalati, Hamed Ghafarirad, S.Mehdi Rezaei,
"Behavior modeling of pneumatic soft bending actuators in free and contact conditions", Modares Mechanical Engineering,
Vol. 23,
Num. 4,
Page 235-247,
March 2023,
4
Mohsen Asghari, Mohammad Zareinejad, S.Mehdi Rezaei, Hamidreza Amindavar,
"Robust Matched Field Processing Using an Empirical Characteristic Function Approach Under Impulsive Noise Environments", Acoustics Australia,
Vol. 51,
Num. 1,
Page 201-219,
February 2023,
5
Farhad Khajvand, Mohammad Zareinejad, S.Mehdi Rezaei, Keivan Baghestan,
"Design and implementation of a series hydraulic hybrid propulsion system
to increase regenerative braking energy saving range", ENERGY CONVERSION AND MANAGEMENT,
Vol. 279,
Num. 3,
Page 1-9,
February 2023,
6
Mohsen Asghari, Mohammad Zareinejad, S.Mehdi Rezaei, Hamidreza Amindavar,
"DOA Estimation of Noncircular Signals Under Impulsive Noise Using a Novel Empirical Characteristic Function-Based MUSIC", CIRCUITS SYSTEMS AND SIGNAL PROCESSING,
Vol. 42,
Num. 1,
Page 3706-3743,
January 2023,
7
Farnood Norouzi Niyaee, Kamran Taheri Sartang, Mohammad Mahan Taghavi Farahi, Rasul Fesharakifard, S.Mehdi Rezaei,
"Optimal Electric Motor Selection for Tube Bending Machine within a Manufacturing Automation Cell", Modares Mechanical Engineering,
Vol. 22,
Num. 10,
Page 161-166,
October 2022,
8
Seyed Hasan Musavi, Hamed Adibi, S.Mehdi Rezaei,
"Manufacturing of durable tribological surface by grinding process", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,
Vol. 122,
Num. 7,
Page 3393-3410,
September 2022,
9
Seyed Hasan Musavi, Hamed Adibi, S.Mehdi Rezaei,
"An experimental study on bubble dynamics and pool boiling heat transfer of grinding/laser-structured surface", HEAT AND MASS TRANSFER,
Vol. 0,
Num. 0,
Page 1-18,
September 2022,
10
Reza Nourizadeh Nesheli, Mohammad Zareinejad, S.Mehdi Rezaei, Hamed Adibi,
"Modeling of Sound Generation Mechanism During the Turning Process", Modares Mechanical Engineering,
Vol. 22,
Num. 8,
Page 529-539,
August 2022,
11
Omid Hatami Farzaneh, Hamed Adibi, S.Mehdi Rezaei,
"Evaluation of the grinding process utilizing an auxiliary compressed air jet on cleaning the grinding wheel surface", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING,
Vol. 0,
Num. 0,
Page 1-13,
June 2022,
12
Omid Hatami Farzaneh, Hamed Adibi, S.Mehdi Rezaei,
"Application of a compressed air jet for cleaning of wheel surface in grinding nickel-based super alloy Inconel 718", CIRP Journal of Manufacturing Science and Technology,
Vol. 37,
Num. 0,
Page 233-244,
May 2022,
13
Seyed Hasan Musavi, Hamed Adibi, S.Mehdi Rezaei,
"Development of an innovative grinding process for producing functional surfaces", TRIBOLOGY INTERNATIONAL,
Vol. 173,
Num. 0,
Page 1-20,
May 2022,
14
Mohammad Bayat, Hamed Adibi, Amin Barzegar, S.Mehdi Rezaei,
"Experimental and numerical investigation of heat generation and surface integrity of ZrO2 bioceramics in grinding process under MQL condition", JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS,
Vol. 131,
Num. 0,
Page 1-16,
April 2022,
15
Mohsen Asghari, Mohammad Zareinejad, S.Mehdi Rezaei, Hamidreza Amindavar,
"ECF-MUSIC: An empirical characteristic function based direction of arrival (DOA) estimation in the presence of impulsive noise", DIGITAL SIGNAL PROCESSING,
Vol. 123,
Num. 1,
Page 1-15,
April 2022,
16
Farhad Khajvand, Mohammad Zareinejad, S.Mehdi Rezaei, Keivan Baghestan,
"Series Hydraulic Hybrid Propulsion System Design And Simulation With Friction
Brake Removal Approach", ,
Vol. 12,
Num. 2,
Page 1-12,
March 2022,
17
Hamed Esmaeili, Hamed Adibi, Reza Rizvi, S.Mehdi Rezaei,
"Coupled thermo-mechanical analysis and optimization of the grinding process for Inconel 718 superalloy using single grit approach", TRIBOLOGY INTERNATIONAL,
Vol. 171,
Num. 0,
Page 1-20,
March 2022,
18
Reza Nourizadeh Nesheli, S.Mehdi Rezaei, Mohammad Zareinejad, Hamed Adibi,
"Comprehensive investigation on sound generation mechanisms during machining for monitoring purpose", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,
Vol. 121,
Num. 0,
Page 1589-1610,
March 2022,
19
Naser Abbasi, Mohammad Reza Razfar, S.Mehdi Rezaei, Khosro Madanipour, Mohsen Khajehzadeh,
"Investigation of laser induced plasma assisted ablation of glass in presence of magnetic field", AUT Journal of Mechanical Engineering,
Vol. 0,
Num. 0,
Page 1-23,
January 2022,
20
Naser Abbasi, Mohammad Reza Razfar, S.Mehdi Rezaei, Khosro Madanipour, Mohsen Khajehzadeh,
"Experimental investigation of deep-hole micro-drilling of glass using LIPAA process", MATERIALS AND MANUFACTURING PROCESSES,
Vol. 0,
Num. 0,
Page 1-11,
November 2021,
21
Ehsan Amirpour, Rasul Fesharakifard, Hamed Ghafarirad, S.Mehdi Rezaei, Alireza Saboukhi, Mohammad Savabi, Masoud Rahimi Gorji,
"A novel hand exoskeleton to enhance fingers motion for tele-operation of a robot gripper with force feedback", MECHATRONICS,
Vol. 81,
Num. 1,
Page 1-18,
November 2021,
22
Hamed Esmaeili, Hamed Adibi, S.Mehdi Rezaei,
"Study on surface integrity and material removal mechanism in eco-friendly grinding of Inconel 718 using numerical and experimental investigations", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,
Vol. 112,
Num. 0,
Page 1797-1818,
January 2021,
23
Seied Javad Aaraj Khodaii, Hamed Adibi, Farshad Barazandeh, S.Mehdi Rezaei, Ahmed A.D. Sarhan,
"Investigation of the surface integrity, flexural strength on the grinding of alumina for biomedical applications", PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY,
Vol. 67,
Num. 0,
Page 110-122,
September 2020,
24
Seied Javad Aaraj Khodaii, Hamed Adibi, Farshad Barazandeh, Akbar Solhtalab, S.Mehdi Rezaei, Ahmed A.D. Sarhan,
"Improvement of surface integrity in the grinding of bioceramic partially stabilized zirconia using analytical, numerical, and experimental methods", CERAMICS INTERNATIONAL,
Vol. 46,
Num. 9,
Page 13784-13797,
June 2020,
25
Hamed Esmaeili, Hamed Adibi, S.Mehdi Rezaei,
"Surface Quality, Efficiency and Process Optimization of Grinding
Carbon Fiber?Reinforced Silicon Carbide Composite", Modares Mechanical Engineering,
Vol. 20,
Num. 6,
Page 1409-1421,
June 2020,
26
Aliakbar Hadinezhad Roudi, Rasul Fesharakifard, S.Mehdi Rezaei, Ali Nahvi,
"Virtual Manual Arc Welding by Real-Time Process Simulation for Effective Training", AUT Journal of Mechanical Engineering,
Vol. 5,
Num. 2,
Page 1-32,
May 2020,
27
Seied Javad Aaraj Khodaii, Farshad Barazandeh, S.Mehdi Rezaei, Hamed Adibi, Ahmed Sarhan,
"Surface integrity and flexural strength improvement in grinding partially stabilized zirconia", Journal of Central south university,
Vol. 26,
Num. 12,
Page 3261-3278,
January 2020,
28
Seied Javad Aaraj Khodaii, Farshad Barazandeh, S.Mehdi Rezaei, Hamed Adibi, Ahmed Sarhan,
"Influence of grinding parameters on phase transformation, surface roughness, and grinding cost of bioceramic partially stabilized zirconia (PSZ) using diamond grinding wheel", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,
Vol. 105,
Num. 11,
Page 4715-4729,
November 2019,
29
Hamed Ghafarirad, S.Mehdi Rezaei, Mohammad Zareinejad,
"Hysteretic Constitutive Equations Based Continuous Dynamic Modeling of Bending Piezoelectric Actuators", Modares Mechanical Engineering,
Vol. 19,
Num. 5,
Page 1229-1239,
May 2019,
30
Akbar Solhtalab, Hamed Adibi, Amir Esmaeilzare, S.Mehdi Rezaei,
"Cup wheel grinding-induced subsurface damage in optical glass BK7: An experimental, theoretical and numerical investigation", PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY,
Vol. 57,
Num. 0,
Page 162-175,
April 2019,
31
Hamed Esmaeili, Hamed Adibi, S.Mehdi Rezaei,
"An efficient strategy for grinding carbon fiber-reinforced silicon carbide composite using minimum quantity lubricant", CERAMICS INTERNATIONAL,
Vol. 45,
Num. 0,
Page 10852-10864,
March 2019,
32
Reza Ebrahimpour, Rasul Fesharakifard, S.Mehdi Rezaei,
"An Adaptive Approach to Compensate Seam Tracking Error in Robotic Welding Process by a Moving Fixture", International Journal of Advanced Robotic Systems,
Vol. 15,
Num. 6,
Page 1-9,
December 2018,
33
Farshad Barazandeh, Seied Javad Aaraj Khodaii, S.Mehdi Rezaei, Hamed Adibi, Ahmed Sarhan,
"Investigation of grinding partially stabilized zirconia (PSZ) for dental Implant application", ,
Vol. 18,
Num. 4,
Page 951-958,
May 2018,
34
Amir Esmaeilzare, S.Mehdi Rezaei, Bahram Ramezanzadeh,
"Corrosion and Magnetic Properties of Encapsulated Carbonyl Iron Particles in Aqueous Suspension by Inorganic Thin Films for Magnetorheological Finishing Application", APPLIED SURFACE SCIENCE,
Vol. 436,
Num. 0,
Page 1200-1212,
April 2018,
35
Hamed Esmaeili, Hamed Adibi, S.Mehdi Rezaei,
"Experimental study on grinding forces and specific energy in three different environments of grinding carbon fiber reinforced silicon carbide composite", ,
Vol. 18,
Num. 1,
Page 379-387,
January 2018,
36
Siavash Sharifi, Ali Tivay, S.Mehdi Rezaei, Mohammad Zareinejad, Bijan Mollaei Dariani,
"Leakage fault detection in Electro-Hydraulic Servo Systems using a
nonlinear representation learning approach", ISA TRANSACTIONS,
Vol. 73,
Num. 0,
Page 154-164,
January 2018,
37
Mostafa Falahi, Mohammad Zareinejad, Keivan Baghestan, Ali Tivay, S.Mehdi Rezaei, Amir Abdullah,
"Precise position control of an electro-hydraulic servo system via robust linear approximation", ISA TRANSACTIONS,
Vol. 80,
Num. 1,
Page 503-512,
January 2018,
38
Hamed Adibi, Hamed Esmaeili, S.Mehdi Rezaei,
"Study on minimum quantity lubrication (MQL) in grinding of carbon fiber-reinforced SiC matrix composites (CMCs)", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,
Vol. 0,
Num. 0,
Page 1-15,
December 2017,
39
Hamed Ghafarirad, S.Mehdi Rezaei, Mohammad Zareinejad, Noor Azizi Bin Mardi,
"Charge-based hysteresis compensation in low impedance piezoelectric actuators by a modified Prandtl–Ishlinskii model", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING,
Vol. 0,
Num. 0,
Page 1-11,
November 2017,
40
Mohammad Sadegh Heydarzadeh, S.Mehdi Rezaei, Nour A Mardi, Ali Kamalie Iglie,
"Compensation of friction and force ripples in the estimation of cutting forces by neural networks", MEASUREMENT,
Vol. 114,
Num. 0,
Page 354-364,
September 2017,
41
Aliakbar Hadinezhad Roudi, S.Mehdi Rezaei, Rasul Fesharakifard, Ali Nahvi,
"Finite Element Analysis of Heat Distribution in Weld Parts by Adaptive Mesh Method", ,
Vol. 7,
Num. 1,
Page 135-145,
May 2017,
42
Amir Esmaeilzare, Ali Bagheri, S.Mehdi Rezaei, Abdolreza Rahimi,
"Numerical analysis and optimization of magnetic flux density in the polishing process with magnetorheological fluid", ,
Vol. 50,
Num. 3,
Page 577-588,
May 2017,
43
Ahsan Saeedzadeh, Ali Tivay, Mohammad Zareinejad, S.Mehdi Rezaei, Abdolreza Rahimi, Keivan Baghestan,
"Energy-efficient hydraulic actuator position tracking using hydraulic system operation modes", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING,
Vol. 0,
Num. 0,
Page 1-15,
December 2016,
44
Mohsen Asghari, S.Mehdi Rezaei, Mohammad Zareinejad,
"Robust Position Control of Piezoelectric Actuator Using Self sensing Actuation", ,
Vol. 16,
Num. 8,
Page 37-46,
August 2016,
45
Reza Monfaredi, S.Mehdi Rezaei, Heidar Ali Talebi,
"A new observer-based adaptive controller for cooperative handling of an unknown object", ROBOTICA,
Vol. 34,
Num. 7,
Page 1437-1463,
July 2016,
46
Venus Pasandi, Mahyar Naraghi, S.Mehdi Rezaei, Mohammad Zareinejad, Keivan Baghestan,
"Design of A Nonlinear Bilateral Teleoperation System coupled with non-passive Environments", ,
Vol. 16,
Num. 6,
Page 378-386,
July 2016,
47
Ahsan Saeedzadeh, S.Mehdi Rezaei, Abdolreza Rahimi, Mohammad Zareinejad,
"Energy-Efficient Position Tracking For Digital Hydraulic Systems Using Fast- Switching Valve", ,
Vol. 16,
Num. 4,
Page 239-247,
June 2016,
48
Farzan Soleymani, S.Mehdi Rezaei, Mohammad Zareinejad, Keivan Baghestan, Abdolreza Rahimi,
"Position control of a servo-pneumatic actuator with mis-matched uncertainty using multiple-surface sliding mode controller and high-gain observer", TRANSACTIONS OF THE INSTITUTE OF MEASUREMENT AND CONTROL,
Vol. 0,
Num. 0,
Page 1-12,
April 2016,
49
Manadis Ghanbarbakhsh, S.Mehdi Rezaei, Mohammad Zareinejad, Ali Tivay, Ahmed Aly Diaa Mohammed Sarhan,
"A novel rate-dependent hysteresis modeling and position control technique for piezo-actuated bimorph
beams", JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES,
Vol. 0,
Num. 0,
Page 1-12,
December 2015,
50
Amir Esmaeilzare, Hamed Gholipour, Hamed Adibi, S.Mehdi Rezaei,
"Surface and Subsurface Damage Measurements in Zerodur Glass-Ceramic Grinding Process and their Correlation with Surface Roughness", ,
Vol. 15,
Num. 13,
Page 332-337,
November 2015,
51
Hamed Esmaeili, Hamed Adibi, S.Mehdi Rezaei,
"Modelling and optimization of creep feed grinding parameters for gas turbine blades", ,
Vol. 15,
Num. 13,
Page 318-322,
November 2015,
52
Keivan Baghestan, S.Mehdi Rezaei, Heidar Ali Talebi, Mohammad Zareinejad,
"An energy-saving nonlinear position control strategy for electro-hydraulic servo systems", ISA TRANSACTIONS,
Vol. 0,
Num. 0,
Page 1-12,
October 2015,
53
Reza Nourizadeh Nesheli, S.Mehdi Rezaei, Mohammad Zareinejad, Keivan Baghestan, Ali Tivay, Mozafar Saadat,
"Robust hydraulic actuator force control through relief discharge", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART I-JOURNAL OF SYSTEMS AND CONTROL ENGINEERING,
Vol. 0,
Num. 0,
Page 1-11,
November 2014,
54
Keivan Baghestan, S.Mehdi Rezaei, Heidar Ali Talebi, Mohammad Zareinejad,
"Robust force control in a novel electro-hydraulic structure using polytopic uncertainty representation", ISA TRANSACTIONS,
Vol. 0,
Num. 0,
Page 0-0,
August 2014,
55
, Vahid Dabbagh, S.Mehdi Rezaei, Mohammad Zareinejad, N.A Mardi, A. Sarhan,
"Robust control-based linear bilateral teleoperation system
without force sensor", JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING,
Vol. 0,
Num. 0,
Page 1-9,
June 2014,
56
Hamed Ghafarirad, S.Mehdi Rezaei, Ahmed A.D. Sarhan, Noor Azizi Mardi,
"Modified robust external force control with disturbance rejection with application to piezoelectric actuators", TRANSACTIONS OF THE INSTITUTE OF MEASUREMENT AND CONTROL,
Vol. 0,
Num. 0,
Page 1-13,
June 2014,
57
Ali Tivay, Mohammad Zareinejad, S.Mehdi Rezaei, Keivan Baghestan,
"A switched energy saving position controller for variable-pressure electro-hydraulic servo systems", ISA TRANSACTIONS,
Vol. 53,
Num. 4,
Page 1297-1306,
May 2014,
58
Amir Esmaeil Zare, Abdolreza Rahimi, S.Mehdi Rezaei,
"Investigation of subsurface damages and surface roughness in grinding process of Zerodur® glass-ceramic", APPLIED SURFACE SCIENCE,
Vol. 313,
Num. 0,
Page 67-75,
May 2014,
59
Sepehr Ramezani, S.Mehdi Rezaei, Mohammad Zareinejad, Keivan Baghestan,
"Control of pneumatic servo system based on simultaneous pressure observing on both sides of the cylinder by high-gain observe", ,
Vol. 99,
Num. 9,
Page 1-8,
April 2014,
60
Hamed Ghafarirad, S.Mehdi Rezaei, Ahmed A.D. Sarhan, Mohammad Zareinejad,
"Continuous dynamic modelling of bimorph piezoelectric cantilevered
actuators considering hysteresis effect and dynamic behaviour analysis", MATHEMATICAL AND COMPUTER MODELLING OF DYNAMICAL SYSTEMS,
Vol. 00,
Num. 0,
Page 0-0,
April 2014,
61
Mohsen Asghari, S.Mehdi Rezaei, Amir Hossein Rezaei, Mohammad Zareinejad, Hamed Ghafarirad,
"Self-sensing actuation using online capacitance measurement with application to active vibration control", JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES,
Vol. 0,
Num. 0,
Page 1-15,
February 2014,
62
Keivan Baghestan, S.Mehdi Rezaei, Heidar Ali Talebi, Mohammad Zareinejad,
"A Controller-observer scheme for nonlinear bilateral teleoperation systems", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART I-JOURNAL OF SYSTEMS AND CONTROL ENGINEERING,
Vol. 228,
Num. 1,
Page 49-59,
January 2014,
63
Hamed Adibi, S.Mehdi Rezaei, Ahmed A. D. Sarhan,
"Grinding Wheel Loading Evaluation Using Digital Image Processing", JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME,
Vol. 136,
Num. 1,
Page 1-10,
January 2014,
64
Hamed Ghafarirad, S.Mehdi Rezaei, Mohammad Zareinejad, Ahmed A.D. Sarhan,
"Disturbance rejection-based robust control for micropositioning of piezoelectric actuators", COMPTES RENDUS MECANIQUE,
Vol. 0,
Num. 0,
Page 0-0,
December 2013,
65
Mohammad Fazli, S.Mehdi Rezaei, Mohammad Zareinejad,
"Survey, Experiment and Improvement of Micro Actuator Positioning for Precise Grinding by Neural Network", ,
Vol. 45,
Num. 2,
Page 87-104,
December 2013,
66
Hamed Adibi, S.Mehdi Rezaei, Ahmed Ali Dia Sarhan,
"Investigation on using high-pressure fluid jet in grinding process for less wheel loaded areas", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,
Vol. 0,
Num. 0,
Page 0-0,
November 2013,
67
Reza Seifabadi, S.Mehdi Rezaei, Saeed Shiry Ghidary, Mohammad Zareinejad,
"A Teleoperation System for Micro Positioning with Haptic Feedback", INTERNATIONAL JOURNAL OF CONTROL AUTOMATION AND SYSTEMS,
Vol. 11,
Num. 4,
Page 768-775,
August 2013,
68
Hamed Adibi, S.Mehdi Rezaei, Ahmed A.D. Sarhan,
"Analytical modeling of grinding wheel loading phenomena", INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,
Vol. 0,
Num. 0,
Page 0-0,
January 2013,
69
, S.Mehdi Rezaei, Mohammad Zareinejad, Hamed Ghafarirad,
"Enhanced time delayed linear bilateral
teleoperation system by external force
estimation", TRANSACTIONS OF THE INSTITUTE OF MEASUREMENT AND CONTROL,
Vol. 0,
Num. 0,
Page 1-11,
November 2012,
70
, Mohammad Zareinejad, S.Mehdi Rezaei, Keivan Baghestan, Nima Sarli,
"Stable multi-user interaction with cooperative haptic
virtual environments by a modi?cation of passive
set-position modulation", IET CONTROL THEORY AND APPLICATIONS,
Vol. 6,
Num. 16,
Page 2538-2548,
November 2012,
71
, S.Mehdi Rezaei, A. R Khoogar, Mohammad Zareinejad, Keivan Baghestan,
"A novel control framework for nonli near time-dela yed
Dual-ma ster/Single-slave teleoperation", ISA TRANSACTIONS,
Vol. 0,
Num. 0,
Page 1-10,
November 2012,
72
Hamed Ghafarirad, S.Mehdi Rezaei, Mohammad Zareinejad, Hamdi, Mohamed Salah,,
"Robust control with unknown dynamic estimation for multi-axial piezoelectric actuators with coupled dynamics", COMPTES RENDUS MECANIQUE,
Vol. 340,
Num. 9,
Page 646-660,
September 2012,
73
, Mohammad Zareinejad, S.Mehdi Rezaei, Hamid Sheikhzadeh Nadjar, Keivan Baghestan,
"A novel control architecture for physiolog
compensation in teleoperated systems", INTERNATIONAL JOURNAL OF MEDICAL ROBOTICS AND COMPUTER ASSISTED SURGERY,
Vol. 0,
Num. 0,
Page 1-18,
May 2012,
74
Alireza Jafari, S.Mehdi Rezaei, Saeed Shiry Ghidary, Mohammad Zareinejad, Keivan Baghestan, Mohammadreza Dehghan,
"A stable perturbation estimator in force-reflecting passivity-based teleoperation", TRANSACTIONS OF THE INSTITUTE OF MEASUREMENT AND CONTROL,
Vol. 0,
Num. 0,
Page 1-10,
February 2012,
75
Alireza Jafari, Mohammad Zareinejad, S.Mehdi Rezaei, Saeed Shiry Ghidary, Keivan Baghestan,
"Stability of delayed passivity-based teleoperation systems in transition", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART I-JOURNAL OF SYSTEMS AND CONTROL ENGINEERING,
Vol. 0,
Num. 0,
Page 1-10,
January 2012,
76
Hamed Ghafarirad, S.Mehdi Rezaei, Mohammad Zareinejad, M. Hamdi,
"A robust adaptive control for micro-positioning of piezoelectric actuators with environment force estimation", TRANSACTIONS OF THE INSTITUTE OF MEASUREMENT AND CONTROL,
Vol. 0,
Num. 0,
Page 1-10,
December 2011,
77
Reza Mohajerpoor, S.Mehdi Rezaei, Heidar Ali Talebi, S.Majid Nourhoseini, Reza Monfaredi,
"A Robust Adaptive HYBRID FORCE/POSITION CONTROL SCHEME OF TWO PLANAR MANIPULATORS HANDLING AN UNKNOWN OBJECT INTERACTING WITH AN ENVIRONMENT", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART I-JOURNAL OF SYSTEMS AND CONTROL ENGINEERING,
Vol. 0,
Num. 0,
Page 0-0,
December 2011,
78
Abdolhamid Azizi, Hamed Adibi, S.Mehdi Rezaei, Hamid Baseri,
"Modeling of Specific Grinding Energy Based on Wheel Topography", Advanced Materials Research (AMR),
Vol. 325,
Num. 0,
Page 72-78,
August 2011,
79
Mohammad Sheikhsofla, Farshad Barazandeh, S.Mehdi Rezaei, Mohamad Zareinejhad, Mozafar Saadat,
"Observer-based robust motion control of a piezo-actuated stage under external disturbances", TRANSACTIONS OF THE INSTITUTE OF MEASUREMENT AND CONTROL,
Vol. 06,
Num. 24,
Page 1-11,
June 2011,
80
Mohammad Motamedi, Mohammad Taghi Ahmadian, Gholamreza Vossoughi , S.Mehdi Rezaei, Mohammad Zareinejad,
"Adaptive sliding mode control of a piezo-actuated bilateral teleoperated micromanipulation system", PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY,
Vol. 35,
Num. 2,
Page 309-317,
April 2011,
81
Hamed Ghafarirad, S.Mehdi Rezaei, Amir Abdullah, Mohammad Zareinejad, Mozafar Saadat,
"Observer-Based Sliding Mode Control with Adaptive
Perturbation Estimation for Micropositioning Actuators", PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY,
Vol. 35,
Num. 2,
Page 271-281,
April 2011,
82
Farshad Barazandeh, Mohammad Sadegh Heydarzadeh, S.Mehdi Rezaei, Seid Mohamadali Sadat, S. Dalilsafaei,
"Design Enhancement of Mobile Snake Robots Based on Snake Anatomy", Amirkabir Journal,
Vol. 42,
Num. 3,
Page 9-20,
December 2010,
83
Mohammad Sheikhsofla, S.Mehdi Rezaei, Mohammad Zareinejad, Mozafar Saadat,
"Trajectory tracking control of a piezoelectric stage for dynamic load applications", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART I-JOURNAL OF SYSTEMS AND CONTROL ENGINEERING,
Vol. 224,
Num. 8,
Page 983-994,
December 2010,
84
M. Motamedi, Mohammad Taghi Ahmadian, Gh. Vossoughi, S.Mehdi Rezaei, Mohammad Zareinejad,
"Adaptive Sliding Mode Control of a Piezo-Actuated Bilateral Teleoperated Micromanipulation System", PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISIONENGINEERING AND NANOTECHNOLOGY,
Vol. 0,
Num. 0,
Page 0-0,
December 2010,
85
Hamed Ghafarirad, S.Mehdi Rezaei, Amir Abdullah, Mohammad Zareinejad, M. Saadat,
"Observer-Based Sliding Mode Control with Adaptive
Perturbation Estimation for Micropositioning Actuators", PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISIONENGINEERING AND NANOTECHNOLOGY,
Vol. 0,
Num. 0,
Page 0-0,
November 2010,
86
Hady Parsaiyan, Farshad Barazandeh, Saman Nazari Nejad, S.Mehdi Rezaei, Mansour Kabganian, Mparsaiyan, M Safdari,
"Theoretical and experimental study of a novel microfabricated fibrillar structure", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS,
Vol. 224,
Num. 4,
Page 199-207,
October 2010,
87
Reza Monfaredi, S.Mehdi Rezaei, Heidar Ali Talebi,
"Cooperative robotic system for handling a geometrically unknown object", Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering,
Vol. 224,
Num. 0,
Page 0-0,
September 2010,
88
Mohammad Sheikhsofla, S.Mehdi Rezaei, Mohammad Zareinejad, M. Saadat,
"Trajectory tracking control of a piezoelectric stage for dynamic load applications", Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering,
Vol. 224,
Num. 0,
Page 0-0,
September 2010,
89
Reza Seifabadi, S.Mehdi Rezaei, Saeed Shiry Ghidary, Mohammad Zareinejad, Mozafar Saadat,
"To enhance transparency of a piezo-actuated tele-micromanipulator using passive bilateral control", ROBOTICA,
Vol. 28,
Num. 5,
Page 689-703,
September 2010,
90
Reza Seifabadi, S.Mehdi Rezaei, Saeed Shiry Ghidary, Mohammad Zareinejad, M. Saadat,
"To enhance transparency of a piezo-actuated tele-micromanipulator using passive bilateral control", Robotica,
Vol. 28,
Num. 5,
Page 689-703,
September 2010,
91
Abdolhamid Azizi, S.Mehdi Rezaei, Abdolreza Rahimi,
"Study on the rotary cup dressing of CBN grinding wheel and the grinding performance", International Journal of Advanced Manufacturing Technology,
Vol. 47,
Num. 0,
Page 0-0,
April 2010,
92
S.Mehdi Rezaei, Farshad Barazandeh, Mohammad Sadegh Heydarzadeh, Seid Mohamadali Sadat,
"The Effect of Snake Muscular System on Actuators’ Torque", Journal of Intelligent and Robotic Systems,
Vol. 59,
Num. 0,
Page 0-0,
April 2010,
93
S.Mehdi Rezaei, Farshad Barazandeh, Seid Mohamadali Sadat,
"The Effect of Snake Muscular System on Actuators Torque", Journal of Inteligent and Robotic Systems,
Vol. 0,
Num. 0,
Page 0-0,
March 2010,
94
Mohammad Zareinejad, Saeed Shiry Ghidary, S.Mehdi Rezaei, Amir Abdullah,
"Precision Control of a Piezo-Actuated Micro-Tele-manipulation System", International Journal of Precision Engineering and Manufacturing,
Vol. 11,
Num. 1,
Page 0-0,
December 2009,
95
Mohammad Zareinejad, S.Mehdi Rezaei, Saeed Shiry Ghidary, Amir Abdullah,,
"Robust Impedance Control of a Piezoelectric Stage Under Thermal and External Load Disturbances", Control and Cybernetics,
Vol. 38,
Num. 3,
Page 0-0,
November 2009,
96
Mohammad Zareinejad, S.Mehdi Rezaei, Hossein Habibollahi Najafabadi, Saeed Shiry Ghidary, Amir Abdullah, [en-name N/A],
"Novel multi-rate control strategy for piezoelectric actuators", Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering,
Vol. 223,
Num. 5,
Page 0-0,
July 2009,
97
Abdolhamid Azizi, Abdolreza Rahimi, S.Mehdi Rezaei, Hamid Baseri,
"Modeling of Dressing Forces During Rotary Diamond Cup Dressing of Vitrified Cbn Grinding Wheels", Machining Science and Technology,
Vol. 13,
Num. 3,
Page 0-0,
July 2009,
98
Hady Parsaiyan, Farshad Barazandeh, S.Mehdi Rezaei, Mehdi Parsa, Masoud Safdari,
"Wide-end fibers and their adhesion performance in biological attachment systems", ,
Vol. ,
Num. 29,
Page 0-0,
June 2009,
99
Mohammad Zareinejad, S.Mehdi Rezaei, Amir Abdullah, Saeed Shiry Ghidary,
"Development of a piezo-actuated micro-tele-operation system for cell manipulation.", International Journal of Medical Robotics and Computer Assisted Surgery,
Vol. 5,
Num. 1,
Page 0-0,
December 2008,
100
Hamid Baseri, S.Mehdi Rezaei, Abdolreza Rahimi, M. Saadat,
"Analysis of The Disc Dressing Effects on Grinding Performance-Part 1:Simulation of The Disc Dressed Wheel Surface", Machining Science and Technology,
Vol. 12,
Num. 2,
Page 183-196,
April 2008,
101
Hamid Baseri, S.Mehdi Rezaei, Abdolreza Rahimi, M. Saadat,
"Analysis of The Disc Dressing Effects on Grinding Performance-Part 2:Effects of The Wheel Topographical Parameters on The Specific Energy and Workpiece Surface Roughness", Machining Science and Technology,
Vol. 12,
Num. 2,
Page 197-213,
April 2008,
102
Hamid Baseri, S.Mehdi Rezaei, Abdolreza Rahimi, Mohsen Rezaeian Akbarzadeh,
"Influence of Disk Dressing Process on Increased Grinding Performance", Journal of Amirkabir,
Vol. 18,
Num. 66,
Page 0-0,
August 2007,
103
Hamid Baseri, S.Mehdi Rezaei, Abdolreza Rahimi, Mohsen Rezaeian Akbarzadeh,
"Modelling of Disc Dressing Forces", Machining Science and Technology,
Vol. 11,
Num. 2,
Page 0-0,
January 2007,